GPS104b Vehicle Car Truck Rastreador Veicular Car GPS Tracker Tracking Device with Remote Control

GPS104B Vehicle Car Truck rastreador veicular car gps tracker Tracking Device with Remote Control

Features
* Waterproof shell
* Built-in large capacity 6000MA battery, long standby time of 100 days.
* Powerful magnets to absorb to vehicle firmly.
* Real-time tracking, retrieve of lost vehicles, cargo.
* Movement alarm, Geo-fence alarm, shock sensor alarm, remote monitoring.
* Support map viewing on mobile phone screen, get absolute address by SMS, GPRS real time tracking on web based server.
* Built-in high sensitivity GPS and GSM antenna to make it can be used alone without installation, convenient and quick.
* Support for external GSM antenna, GPS antenna, and external power supply for the tracker to be installed on the device which can provide
power for long-term using.
Main Function
1. Single Locating
Tracking location, when no GPS signal, the SMS includes the last valid latitude & longitude as well as the LAC code of current position, the LAC
code can be input in the column of "manual track" menu of web platform.

2. Auto track continuously
a. Track with limited times upon time interval
b. Track with unlimited times upon time interval
c. Smart track upon time and distance interval

3. Automatic update positions of vehicle turns
The tracker will update the positions automatically to web server once the vehicle changing driving direction over pre set angle value to form a
smooth trajectory consistent with the actual road, this function is only effective in GPRS mode.

4. GPS drift suppression
The GPS data stop updating if vehicle is not moving and latitude and longitude always keep same, and GPS data updates automatically when
vehicle is moving.

5. Get absolute street address 
Note: You must set up the APN of your local GSM network for the SIM card in tracker first before using this function.

6. Location based service (LBS)
When the tracker device doesn't received valid GPS signals, tracker will locate by LBS, the messages includes the GPS coordinates of the last
position in SMS mode, but the LAC in message is the current new position, the location can be seen by input the LAC code in the menu "Manual
Track" of web platform ;haoday.en.made-in-china.com, you can also send command "address+password" to tracker to get the newest absolute address
and newest GPS coordinates as well; tracker will automatically switch to track by location based service in GPRS mode, and actualized on the
map of web server with LBS mark. And there may be some inaccuracy with actual location by LBS tracking; the bias depends on GSM reception.

Note: This feature can be used normally in most areas according to the signal of GSM network. It may not be available in some areas.

7. Check the Vehicle State.
8. Check IMEI
9. Terminal (local) Time Setting
10. Monitor (Voice Surveillance)
The default mode is "track" (Track mode). Send SMS "monitor+password" to the unit, and it will reply "monitor ok!" and switch to "monitor" mode.

11. Data Logging
Logging Volume: Built-in flash 1MB (store about 16,000 positions); expanded volume depends on the SD card inserted.

12. Data Load
13. Forward the third parties' message
14. Cut off the Oil and Power System
a. Execute immediately Mode
Send command "quickstop+password" to tracker, it will reply "quickstop OK". Then tracker will stop the car immediately after
"stop" command. Send command "stop+password" to tracker, tracker will execute it and reply "Stop engine Succeed". And it will
remain immobile state until next command to resume.

b.Execute depends on speed(Default mode)
Send command "noquickstop+password" to tracker, It will reply "noquickstop OK", Then the tracker won't stop the car
immediately after "stop" command during the speed above 20KM/H, instead, it will reply "it will be executed after speed less than
20KM/H", and stop the car when the speed is less than 20KM/H. 

15. Resume the Oil and Power System
16. Sleep Mode
a. Sleep by time 
Send "sleep+password+space+time", tracker will reply "sleep time ok" if none of the alarms listed under chapter IV has been set and no
operations, tracker will fall asleep in 5 minutes, LED will be off, calling or SMS can awake the tracker. If these alarms have been set, tracker
will enter sleep by detecting shock sensor. And tracker will sleep by time as default.

b. Sleep by shock sensor
Send "sleep+password+space+shock", tracker will reply "sleep shock ok", it will enter sleep mode after detect no shock, and LED will be off.

17. No sleep mode
18. Geo-fence
19. Multi-area management
20. Movement alert
21. Overspeed alert
22.Accident alarm (Optional)---If you need this function, you add extra $6 for it will be ok!
When tracker detects accident occurred (severe impact), it will send " Accident! + latitude & longitude " to all authorized phone numbers.

23. Shock Sensor Alarm
24. SOS Alarm
25. Low battery alert
26. Power off alarm
27. GPS blind Spot alert
28. TCP/UDP switch
29. Configure parameters by USB
Connect tracker to computer with the USB cable (option), and open file user_config.ini with notepad and operate it according to the
examples. 
Note: Correct password is need every time you configure the tracker.

30. Less GPRS traffic
Tracker will change to less GPRS traffic mode & sleep by shock sensor mode after parking 5 minutes, GPRS disconnect and connect again
when alarm being triggered or start driving.

31. Setup monitor center number
If monitor center number doesn't setup, auto track messages will be sent to the cell phone which send this command.
 
Web platform and PC installation tracking software:
a. Web based platform haoday.en.made-in-china.com Configuration IP: 202.104.150.75 Port: 9000. Please check "software platform
user manual" included in the CD for detailed operation information.
b. PC based installation tracking software user manual included in the CD in package, it is free for using!